Features
· 150 MHz
TMS320C6711 DSP (200 MHz when avail.)
· 4 Channels 10 MHz, 14-bit Input
· 4 Channels 15 MHz or 2/30 or 1/50, 16-bit Output
· 64 Bits Digital I/O
· 32MB SDRAM
· PCI 64/32 bit, 33 MHz, 5V/3.3V
· Complex trigger modes with hardware event logging
· Multiboard Synchronization (CLKLink, SyncLink)
|
Applications
· Wireless &
Broadband Hardware Testing
· Ultra-Fast Flexible Data Acquisition
· Video Processing
· Semiconductor Testing
· RADAR
· Electronic Warfare
· Agile Waveform Generation
· Noise Cancellation
· Embedded Control
· Precision Motion Control
· PID Loop Control
· Vibration Monitoring
· Inspection
· Ultrasound
· Magnetic Bearing Control
· Instrumentation
· Scanning Probe Microscopes
· Data Acquisition and Logging
· Servo Loop Control |
Overview
Conejo is a performance-oriented Digital
Signal Processing (DSP) card for PCI-based data acquisition,
play-back and co-processing with four I/O analog channels at up to
10MS/sec input and up to 50MS/s output. Also available on CompactPCI
- cConejo.
It uses the acclaimed
C6711 DSP processor (TMS320C6711) from Texas Instruments as the
heart of the data movement and processing centre. It provides (4)
simultaneous analog input and (4) analog output and a logic
architecture that supports extremely flexible trigger mechanisms, a
choice of timebase sources and a valuable real-time event log.
With Innovative Integration’s multi-board
support features, Conejo is a truly complete solution for a wide
array of applications like radar, advanced medical imaging, physics
research, video processing, semiconductor testing, transient
capture, arbitrary waveform generation, industrial scanners,
wireless development, precision instruments, RADAR, electronic
warfare, fast servo loop control, inspection, instrumentation, fast
data acquisition and logging etc.
The Conejo board shares many features with
other boards in the Matador product line. These features are
presented in more details in the overview section of the Matador
Series.
Conejo is also supported by
Real Time System Editor,
a software application for building data acquisition and logging
systems without the need to write your own code. This can also be
used for high speed Waveform
Generation applications. |
Conejo DSP Board
Matador Overview [PDF]
DSP Board Data Sheet
[PDF]
DSP Board Block Diagram [Flash]
Manual
TMS320C6711 DSP
Software Tools
Code Composer Studio
Pismo Toolset
Malibu
Sales Office II Forum |