High Speed Data Acquisition with Floating Point C6713 DSP & Waveform Generation Board on cPCI


You are on:
HomeDSP Products > DSP Boards > cConejo
High Speed Data Acquisition with Floating Point C6711 DSP & Waveform Generation Board

Features
· 225 MHz TMS320C6713 DSP (floating point)
· 32MB SDRAM
· 4 Channels 10 MHz, 14-bit Input (ADC)
· 4 Channels 15 MHz, 2/30 or 1/50, 16-bit Output (DAC)
· 64/32 bit PCI, 33 MHz, 5V/3.3V, Hot-Swappable
· Supports complex trigger modes with HW event logging
· Multiboard Synchronization (PXI Bus)

Applications
· Wireless & Broadband Hardware Testing
· Ultra-Fast Flexible Data Acquisition
· Video Processing
· Semiconductor Testing
· RADAR
· Electronic Warfare
· Agile Waveform Generation
· Noise Cancellation
· Embedded Control
· Precision Motion Control
· PID Loop Control
· Vibration Monitoring
· Inspection
· Ultrasound
· Magnetic Bearing Control
· Instrumentation
· Scanning Probe Microscopes
· Data Acquisition and Logging
· Servo Loop Control

Overview

cConejo is a performance-oriented Digital Signal Processing (DSP) card for CompactPCI(cPCI)-based data acquisition, play-back and co-processing with four I/O analog channels at up to 10MS/sec input and up to 50MS/s output. Also available on DesktopPCI - Conejo.

It uses the acclaimed C6713 DSP processor (TMS320C6713) from Texas Instruments as the heart of the data movement and processing centre. It provides (4) simultaneous analog input and (4) analog output and a logic architecture that supports extremely flexible trigger mechanisms, a choice of timebase sources and a valuable real-time event log.

With Innovative Integration’s multi-board support features, cConejo is a truly complete solution for a wide array of applications like radar, advanced medical imaging, physics research, video processing, semiconductor testing, transient capture, arbitrary waveform generation, industrial scanners, wireless development, precision instruments, RADAR, electronic warfare, fast servo loop control, inspection, instrumentation, fast data acquisition and logging etc.

The cConejo board shares many features with other boards in the Matador product line. These features are presented in more details in the overview section of the Matador Series.

cConejo is also supported by Real Time System Editor, a software application for building data acquisition and logging systems without the need to write your own code. This can also be used for high speed Waveform Generation applications.

cConejo DSP Board

Matador Overview [PDF]

DSP Board Data Sheet [PDF]

DSP Board Block Diagram [Flash]

Manual

TMS320C6713 DSP

Software Tools

Code Composer Studio

Pismo Toolset

Malibu

Sales Office

II Forum

Summary: High Speed Data Acquisition with Floating Point C6713 DSP & Waveform Generation Board on cPCI