|
Features
· 4 - 14 Bit, 10 MHz A/D (ADC)
Channels
· 1 - 14 Bit, 10 MHz D/A (DAC) Channels
· Input/Output FIFO's Reduce Interrupt Rates
· Internal Or External Clocking Capabilities |
Applications
· Noise Cancellation
· Embedded Control
· Precision Motion Control
· PID Loop Control
· Vibration Monitoring
· Inspection
· Ultrasound
· Magnetic Bearing Control
· Instrumentation
· Scanning Probe Microscopes
· Data Acquisition and Logging
· Servo Loop Control
· RADAR
· Ultrasound
· Wireless |
Overview
The A4D1 module offers four channels of 10
MHz 14 bit A/D conversion (ADC), and one channel of 10 MHz 14 bit
D/A conversion (DAC) making it ideal for high-speed data
acquisition, transient capture and control systems.
The A/Ds (ADC) from Analog Devices use a
novel pipelined architecture as well as a wide-band sample-and-hold
amplifier making them well suited for direct IF down conversion
extended to 45 MHz.
The A/Ds (ADC) deliver data from a
pipeline which is only four samples deep, resulting in low data
latency - a requirement for servo control applications.
Potentiometers allow each channel gain/offset error correction for
accurate measurements.
A4D1 can be use in the following
applications: Noise Cancellation, Embedded Control, Precision Motion
Control, PID Loop Control, Vibration Monitoring, Inspection,
Ultrasound, Magnetic Bearing Control, Instrumentation, Scanning
Probe Microscopes, Data Acquisition and Logging, Servo Loop Control,
RADAR, Ultrasound, Wireless.
The A4D1 can be used for general purpose
data acquisition tasks on
a PC (fitted to a
ChicoPlus or
cChicoPlus) or remote from a PC (fitted to a
SBC6713e with
EtherNet) by using Real Time
System Editor. |
A4D1 ADC & DAC Board
Data Sheet
[PDF]
Block Diagram [Flash]
Fits on
ChicoPlus
CompactChicoPlus
M6x/cM6x
SBC6x with USB
SBC6711 with USB
SBC6713e with EtherNet |