FPGA Based Module for Custom Interfaces - SerialIO
You are on: Home >  DSP Products > Omnibus > SerialIO
FPGA based board for custom Serial IO

Features
· 24 bits Digital I/O, in sets of 8 on 3 separate connectors
· 150,000 GATE Xilinx Spartan-II FPGA
· 16 LED Indicators

Applications
· Remote Analog Interfaces
· Serial Communication Format Conversion
· Serial Data Collection/Transmission

Overview
The Serial I/O module is an open-platform for implementing custom digital interfaces and hardware-assisted processing between the DSP on the host board (Modular or Solomente Series DSP board) and external hardware.

This card is an excellent platform for receiving/sending and processing serial digital data from/to remote analog systems, developing synchronous and asynchronous custom interfaces to special hardware, integrating hardware-assisted processing like serializing/de-serializing, data merging, time stamping, peak detection, filtering, quadrature decoding, modulation, etc.

Serial IO FPGA Module

Data Sheet [PDF]

Block Diagram [Flash]

Fits on

Low Cost PCI Data Acquisition Systems Logging ChicoPlus Low Cost PXI Data Acquisition Systems Logging CompactChicoPlus DSP Board C6201/C6701 DSP: Data Acquisition & Servo Control PCI/cPCI M6x/cM6x Embedded Controller, DSP, Remote Data Acquisition, USB RS232 SBC6x with USB Embedded Controller, DSP, Remote Data Acquisition, USB RS232 SBC6711 with USB Embedded Controller, DSP & Ethernet, Remote Data Acquisition SBC6713e with EtherNet