Omnibus ModulesNo longer available for new projects Omnibus is a simple data and address bus implemented on several boards by Innovative Integration. Below is the range of Omnibus boards. These boards can be used on ChicoPlus, cChicoPlus, M62, M67, M6713 or SBC6713e. Some customers have developed their own Omnibus modules when there is no suitable board in the range, and have leveraged the use of Innovative's wide range of DSP boards. | |
![]() |
A16D2 OMNIBUS Module, 200 KHz 16-bit A/D muxed 16:1 single-ended, (2) 16-bit D/A. P/N 80026-1
|
![]() |
A4D1 OMNIBUS Module: (4) A/Ds, 14-bit, 10 MHz, (1) D/A, 14-bit, 7.5 MHz, 1K FIFO In/Out. P/N 80020-12
|
![]() |
A4D4 (4) 16-bit, 200 kHz A/D, (4) 16-bit, up to 200 kHz D/A, Programmable gain and filtering. P/N 80020-1
|
![]() |
AD16 AD16 module: 16 simultaneous channels, 16-bit, DC accurate, 195 kHz A/D. P/N 80020-20
|
![]() |
AD40 AD40 module: Two 40 MHz A/D converter channels, 1K FIFO. P/N 80020-17
|
![]() |
AIX AIX module: Four ch 16-bit, 2.5 MHz A/D with 8 K sample FIFOs. P/N 80020-4
|
![]() |
AIX20 AIX20 module: Four ch 12-bit, 20 MHz A/D with 8 K sample FIFOs. P/N 80020-10
|
![]() |
CF CF module: Two ch 12 bit 65 MHz in, Two ch 12 bit 65 MHz out, 300K Gate FPGA (without prgm gain). P/N 80020-28
|
![]() |
DAC40 DAC40 module: Four ch D/A module for high-speed waveform generation. P/N 80020-14
|
![]() |
DIG DIG module: 32-bit digital I/O with two serial ports RS232. P/N 80020-2
|
![]() |
RF OMNIBUS I/O Module: Two ch 12 bit 65 MHz in, Two ch 12 bit 65 MHz out. P/N 80020-24
|
![]() |
SD16 SD16 module: 16 ch of 18-bit, 48 kHz A/D in and D/A out sigma-delta converters. P/N 80020-8
|
![]() |
Serial I/O Serial I/O module with Xilinx Spartan2 XC2S150 for custom logic integration. P/N 80020-35
|
![]() |
Servo16 Servo16 module: 16 in, 16 out, 16-bit, 100kHz, DC accurate P/N 80020-23D
|
![]() |
TH80 Dual Channel High-Speed Digitizer with Ultra-Low Jitter Aperture Control. P/N 80130
|