Intel® Arria® 10 SoC Module

Intel® Arria® 10 SoC Module
Intel® Arria® 10 SoC Module
Intel® Arria® 10 SoC Module

Overview

The Mercury+ AA1 system-on-chip (SoC) module combines Intel’s Arria 10 ARM Processor-based SoC FPGA with fast DDR4 ECC SDRAM, eMMC flash, quad SPI flash, Gigabit Ethernet PHY and an RTC and thus forms a high-performance embedded processing solution, combining the flexibility of a CPU system with the raw, real-time parallel processing power of an FPGA.

Highlights

  • Built around the Intel Arria® 10 ARM® Processor-based SoC FPGA
  • Offers USB 3.0, PCIe® Gen3 x8 and Gigabit Ethernet interface
  • DDR4 SDRAM with Error Correction Code (ECC)
  • 9.6 GByte/s memory bandwith
  • Available in industrial-grade temperature range
  • Smaller than a credit card
  • Linux BSP and tool chain available
  • Powerful and compact FPGA board

Benefits

  • A complete and powerful embedded processing system in a compact, space-saving form factor
  • Large, high-bandwidth memory, with up to 4 GByte of DDR4 ECC SDRAM
  • High-bandwidth data transfer; PCIe® Gen3 x8 interface, and a high number of available LVDS pairs provide high-speed data I/O at low integration cost
  • Lowest power consumption due to the high-efficiency DC/DC converters
  • Support for Linux operating systems

Features

  • Intel Arria® 10 ARM® Processor-based SoC FPGA
    • ARM® dual-core Cortex™-A9
      (32 bit, up to 1.5 GHz)
    • Intel Arria 10 20 nm FPGA fabric
  • Small form factor (74 × 54 mm)
  • 286 user I/Os
    • 18 ARM peripheral I/Os (SPI, SDIO, I2C, UART)
    • 212 FPGA I/Os (single-ended or differential)
      • 168 FPGA I/Os
      • 44 FPGA I/Os shared with USB 3.0
    • 56 MGT signals (clock and data)
  • Up to 4 GByte DDR4 ECC SDRAM
  • 16 GByte eMMC flash
  • 64 MByte quad SPI flash
  • PCIe® Gen3 x8
  • 12 × 10.3125/12.5 Gbit/sec MGTs
  • Gigabit Ethernet
  • USB 3.0 device controller
  • USB 2.0 host/device
  • UART, SPI, I2C, SDIO/MMC
  • 5 to 15 V supply voltage

Module Architecture

Intel® Arria® 10 SoC Module

Click image to enlarge

Not all features are available simultaneously – please check the documentation for any applicable constraints.
All specifications are subject to change without notice. Please verify component specifications with vendor’s datasheets.
Enclustra maintains an errata and revision history document for each product. Please also check the errata of the FPGA device and other components.

Product Selection Matrix

Product Code

SoC FPGA

DDR4 SDRAM

PCIe

Temp Range

Status

ME-AA1-270-3E4-D11E

10AS027E4F29E3SG

2GB

Yes

0 to +85C

ME-AA1-270-2I2-D11E

10AS027E4F29E3SG

2GB

Yes

-40 to +85C

ME-AA1-480-2I3-D12E

10AS048E3F29I2SG

4GB

Yes

-40 to +85C

Key: Mass Production Sampling Contact us

Base Boards

Base board

Description

Mercury+ PE1

A feature packed board with 3 different variants compatible with all Mercury and Mercury+ modules.

Mercury+ ST1

A flexible board optimised for video applications and the perfect fit for our Mercury and Mercury+ modules.

Operating System Support

OS

Details

Availability

Partner

Linux

BSP support for:
DDR3L SDRAM, eMMC flash, Quad SPI flash, USB host, Gigabit Ethernet, U-boot bootloader, Comprehensive user documentation, Software development how-to guide.

Available Now

Target Applications

  • Embedded Computing
  • Data Acquisition
  • High-Speed Communications
  • Drive/Motion Control
  • Digital Signal Processing
  • Image Processing

Information on the product may change, please check the manufacturers website and page for the most up to date information, see the link at the top right of this page.