Upgrade to Xilinx Zynq UltraScale+ MPSoC
If you need a more powerful SoC module or want to upgrade your current Xilinx Zynq solution, then have a look at the Mercury XU5.
Overview
The Mercury ZX1 system-on-chip (SoC) module combines Xilinx’s Zynq-7000-series All Programmable SoC device with fast DDR3 SDRAM, NAND flash, quad SPI flash, a Gigabit Ethernet PHY, dual Fast Ethernet PHY and an RTC and thus forms a complete and powerful embedded processing system.
Highlights
- Built around Xilinx’s Zynq-7000 All Programmable SoC
- Combines the flexibility of a CPU system with the parallel processing power and real-time capabilities of an FPGA system
- Offers PCIe® Gen2 x8, USB 2.0, and Gigabit Ethernet interfaces
- Dual Fast Ethernet for Industrial Ethernet like PROFINET, EtherCAT, POWERLINK or Ethernet/IP
- Available in industrial temperature range
- 64 × 54 mm form factor with dual 168-pin Hirose FX10 connectors has minimal footprint
- Linux BSP and tool chain available
- Powerful and compact FPGA board
Benefits
- High-bandwidth memory – independent PS and PL channels are ideal for most applications
- High-bandwidth data transfer
- A powerful PCIe Gen2 x8 interface, and a high number of available LVDS pairs provide high-speed data I/O at low integration cost
- Low-latency networking Gigabit Ethernet interface provides fast networking capabilities
- Dual Fast Ethernet PHY for Industrial Ethernet
- Support for Linux and VxWorks operating systems
- Lowest power consumption due to the high-efficiency DC/DC converters
Features
- Xilinx Zynq-7000-series SoC FPGA
- ARM® dual-core Cortex™-A9
(32 bit, up to 800 MHz) - Xilinx Kintex®-7 28nm FPGA fabric
- ARM® dual-core Cortex™-A9
- Zynq-7030:
- 170 total user I/Os
- 12 ARM peripheral I/Os (SPI, SDIO, CAN, I2C, UART) ) shared with FPGA I/Os
- 138 FPGA I/Os (single-ended or differential)
- 20 MGT signals (clock and data)
- 170 total user I/Os
- Zynq-7035/45:
- 178 total user I/Os
- 12 ARM peripheral I/Os (SPI, SDIO, CAN, I2C, UART) shared with FPGA I/Os
- 126 FPGA I/Os (single-ended or differential)
- 40 MGT signals (clock and data)
- 178 total user I/Os
- 1 GByte DDR3L SDRAM (PS)
- 256 MByte DDR3L SDRAM (PL)
- PCIe Gen2 x8
- 4 × 6.6 Gbps MGTs (Zynq-7030)
- 8 × 6.6 Gbps MGTs (Zynq-7035)
- 8 × 10.3125 Gbps MGTs (Zynq-7045)
- 512 MB NAND flash
- 64 MB quad SPI flash
- Gigabit Ethernet and USB 2.0 OTG
- Two Fast Ethernet PHYs
- 5 to 15V supply voltage
Module Architecture
Click image to enlarge
Not all features are available simultaneously – please check the documentation for any applicable constraints.
All specifications are subject to change without notice. Please verify component specifications with vendor’s datasheets.
Enclustra maintains an errata and revision history document for each product. Please also check the errata of the FPGA device and other components.
Product Selection Matrix
| Product Code | FPGA | DDR3L SDRAM (PS) | DDR3L SDRAM (PL) | Temp Range | Status |
|---|---|---|---|---|---|
| ME-ZX1-30-2I-D10 | XC7Z030-2FBG676I | 1024MB | 256MB | -40 to +85C |  |
| ME-ZX1-35-1I-D10 | XC7Z035-1FBG676I | 1024MB | 256MB | -40 to +85C | |
| ME-ZX1-45-2I-D10-P | XC7Z045-2FFG676I | 1024MB | 256MB | -40 to +85C | |
Key: Mass Production 
Sampling 
Contact us
Base Boards
| Base board | Description |
|---|---|
| Mercury+ PE1 | A feature packed board with 3 different variants compatible with all Mercury and Mercury+ modules. |
| Mercury+ ST1 | A flexible board optimised for video applications and the perfect fit for our Mercury and Mercury+ modules. |
Operating System Support
OS | Details | Availability | Partner |
|---|---|---|---|
 Linux | BSP support for: | Available Now |  |
 VxWorks | BSP support for: | Contact NetModule for more information |  |
Target Applications
- Embedded Computing
- Data Acquisition
- High-Speed Communications
- Drive/Motion Control
- Digital Signal Processing
- Image Processing
Information on the product may change, please check the manufacturers website and page for the most up to date information, see the link at the top right of this page.
